1.Remove the fender and headlight mounting bolt from the fork arch with the supplied screwdriver and set aside.
2.Place the fender in position. From the back of the front tire, pass the front fender mounting point under the front fork arch.
3.Attach the headlight and fender to the fork arch. Pass the bolt through the headlight mount, fender mounting point and fork arch mounting point.
Notice: the fender bracket should go in between the arch bracket and headlight bracket. Thread the locknut at the bolt end and tighten with the supplied screwdriver.
4.Attach the fender mounting arms to the front fork. Remove the mounting bolts from the fork. Pass the bolt through the arm mount and fork mounting point. Ensure the fender is centered and tighten both the mounting bolts.
5.Center the headlight and adjust the angle slightly downwards to illuminate the road ahead and not blind oncoming traffic. Use the supplied Phillips-head screwdriver to loosen the headlight angle adjustment bolt, tilt the headlight to the optimal position, and then tighten in place securely.
Comments
0 comments
Please sign in to leave a comment.